bing tracking image

Filter Questions and Answers:

reset filter

Expert Answers about Newmar Kountry Star Motorhome


  • How to Select the Correct Replacement Shower Pan
  • As you likely know, the correct replacement shower pan is going to need to have the same dimensions as your current one, including where the drain is oriented. I was unable to find any information about the dimensions of your DuoForm shower pan, but, for example, if it was 24" x 40" and had a left hand drain then the Lippert Components Shower Pan # LC210377 would work. I have added a link for you to our page with each of our available shower pans to check out.
    view full answer...

  • Recommended Trailer Brake Controller For A 2022 Newmar Kountry Star 4037 Motorhome
  • For your 2022 Newmar Kountry Star 4037 Motorhome I recommend the Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional # 90195. There currently isn't a custom wiring harness so you will have to splice the wiring together to install this brake controller. The trailer wiring harness for your motorhome should be bound up together under the dash. Typically manufacturers will bundle the wires together and have a label hanging off them. The wiring connections from the brake...
    view full answer...

  • Replacement Entry Door Lock For A 2022 Newmar 4037
  • Manufacturers do not list the model numbers of the entry door locks so to know if the Bauer Products Keyless Entry Motorhome Door Lock - Left Hand - 8" Wide x 5" Tall # BA46FR will work with your 2022 Newmar 4037 you'll need to remove the existing door lock and measure the cutout hole. The # BA46FR requires a cutout hole dimension of 4-1/2" tall x 4-7/8" wide and a distance from door edge of 1-1/8". If your cutout hole isn't compatible with these requirements then just reply back with...
    view full answer...

  • How to Get to Motor of Lippert Electric Coach Steps for Replacement
  • I checked the owner's manual for the Lippert Coachsteps and to get to the motor it says, "Remove the two bolts that hold the step arm collars to the drive shaft. This will allow you to operate the steps manually." I made a cut out of the instruction manual for you which shows where it says this. I have also added the directions what you will need to do in order to replace the motor; the correct part for this is the Replacement Motor for Lippert Electric Coach Step # LC301695. I have...
    view full answer...